Synthesis of Lightweight Aluminosilicate Proppants from Low-Grade Kaolinitic Clay And Industrial Waste
Keywords:
Ceramic proppants, kaolinite clay, ash–slag wasteAbstract
This study presents the synthesis of lightweight aluminosilicate ceramic proppants using Angren kaolinitic clay and ash–slag industrial waste as raw materials. The effects of composition and sintering temperature (1200–1250 °C) on phase composition and physicomechanical properties were investigated. The results show that increasing the sintering temperature enhances densification, promotes mullite formation, and improves mechanical strength and chemical stability. The optimal composition (CA-3) exhibited low bulk density (1.43 g/cm³), low crushing ratio (6.58%), and high acid resistance (5.56%). XRD analysis confirmed increased crystallinity and mullite development at higher temperatures. The developed proppants demonstrate competitive properties and offer a cost-effective and environmentally sustainable alternative to conventional materials.
References
Tang Y., Ranjith P.G., Perera M.S.A. Major factors influencing proppant behavior and associated damage mechanisms during hydraulic fracturing. Acta Geotechnica. 2018. Vol. 13. P. 757–780.
Zhu J., Li F., Li X., Yang Z., Liao Z., Zhang J., Dorosti F., Wang H., Ge L. Valorization of aluminum–silica-based industrial solid waste to high-quality ceramic proppants: Waste sources and design strategies. Journal of Cleaner Production. 2026. Vol. 546. P. 147800.
Ren Y., Ren Q., Huo Z., Wu X., Zheng J., Hai O. Preparation of glass-shell fly ash–clay-based lightweight aggregate with low water absorption using sodium carbonate solution as a binder. Materials Chemistry and Physics. 2020. Vol. 256. P. 123606.
Handayani A.F., Rosyidah D.H., Sulaksitaningrum R., Susanto P.B., Umniati S. Andesite waste powder as a mineral admixture in concrete: A review. E3S Web of Conferences. 2023. Vol. 445. P. 01030.
Dong Z., Xia J., Fan C., Cao J. Activity of calcined coal gangue fine aggregate and its effect on the mechanical behavior of cement mortar. Construction and Building Materials. 2015. Vol. 100. P. 63–69.
Duan X.M., Xia J.W., Yang J.P. Influence of coal gangue fine aggregate on the microstructure of cement mortar and its mechanism. Journal of Building Materials. 2014. Vol. 17. P. 700–705.
Li Y., Zeng X., Zhou J., Shi Y., Umar H.A., Long G., Xie Y. Development of eco-friendly ultra-high-performance concrete based on waste basalt powder for the Sichuan–Tibet Railway. Journal of Cleaner Production. 2021. Vol. 312. P. 127775.
Rashad A.M., Mohamed R.A.-E., Zeedan S.R., El-Gamal A.A. Basalt powder as a promising material for improving the properties of fly ash geopolymer cement. Construction and Building Materials. 2024. Vol. 435. P. 136805.
Yang H., Chen C., Pan L. Preparation of double-layer glass–ceramic/ceramic tiles from bauxite tailings and red mud. Journal of the European Ceramic Society. 2009. Vol. 29. P. 1887–1894.
Li Y., Lu J., Zeng Y., Liu Z., Wang C. Preparation and characterization of mullite powders from coal fly ash via mullitization and hydrothermal processes. Materials Chemistry and Physics. 2018. Vol. 213. P. 518–524.
Zhou Y., Tian Y.M., Wang K.Y., Li G., Zou X.W., Chai Y.S. Optimization of low-cost, high-performance ceramic proppants using orthogonal experimental design. IOP Conference Series: Materials Science and Engineering. 2017. Vol. 230. P. 012026.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Bayraeva Nasiba Ashurbayevna, Egamberdiyev Abror Ibragimovich, Adizov Bobirjon Zamirovich, Khomidov Fakhriddin Gafurovich, Abdurahimov Dilmurod Hayitmurotovich
This work is licensed under a Creative Commons Attribution 4.0 International License.
